1. Articles mentioning both University of Kent and Cosmin Sinescu

    1-24 of 56 1 2 3 »
    1. Optical Coherence Tomography Investigations and Modeling of the Sintering of Ceramic Crowns

      Optical Coherence Tomography Investigations and Modeling of the Sintering of Ceramic Crowns
      Dental prostheses are sintered in ovens that sometimes suffer from a loss of calibration. This can lead to variations of the sintering temperature outside the range recommended by the manufacturer. Stress and even fractures in dental ceramics may occur, and this leads to the necessity to rebuild the dental construct. The aim of this work is to monitor the quality of sintering processes using an established biomedical imaging techniqueoptical coherence ...
      Read Full Article
    2. Effects of Temperature Variations during Sintering of Metal Ceramic Tooth Prostheses Investigated Non-Destructively with Optical Coherence Tomography

      Effects of Temperature Variations during Sintering of Metal Ceramic Tooth Prostheses Investigated Non-Destructively with Optical Coherence Tomography
      Calibration loss of ovens used in sintering metal ceramic prostheses leads to stress and cracks in the material of the prostheses fabricated, and ultimately to failure of the dental treatment. Periodic calibration may not be sufficient to prevent such consequences. Evaluation methods based on firing supplemental control samples are subjective, time-consuming, and rely entirely on the technicians skills. The aim of this study was to propose an alternative procedure for ...
      Read Full Article
    3. 7th International Conference on Lasers in Medicine: Advanced Laser Technologies in the Hands of Medicine July 2017 Timisoara, Romania

      7th International Conference on Lasers in Medicine: Advanced Laser Technologies in the Hands of Medicine July 2017 Timisoara, Romania
      7th international conference on lasers in medicine in connection with international congress of lasers in dentistry. Advanced laser technologies in the hands of medicine. July 13015 Timisoara, Romania. For more information click here .
      Read Full Article
    4. Assessment of dental plaque by optoelectronic methods

      Assessment of dental plaque by optoelectronic methods
      The formation of dental biofilm follows specific mechanisms of initial colonization on the surface, microcolony formation, development of organized three dimensional community structures, and detachment from the surface. The structure of the plaque biofilm might restrict the penetration of antimicrobial agents, while bacteria on a surface grow slowly and display a novel phenotype; the consequence of the latter is a reduced sensitivity to inhibitors. The aim of this study was ...
      Read Full Article
    5. OCT and shear-force evaluations of zirconia Fixed Partial Prosthesis processed with a conventional CAD/CAM technology

      OCT and shear-force evaluations of zirconia Fixed Partial Prosthesis processed with a conventional CAD/CAM technology
      Introduction. Dental ceramics show better biocompatibility and aesthetic properties in dental constructs with regard to metals. However, they also have an insufficient mechanical stability, as well as low resistance limits due to their fragility. Taking into account these aspects, glass infiltrated with ceramic materials such as alumina (i.e., zirconiareinforced ceramics) is being nowadays considered a better material for full fixed partial prostheses (FPPs) than ceramics: the former has a ...
      Read Full Article
    6. OCT evaluation of single ceramic crowns: comparison between conventional and chair-side CAD/CAM technologies

      OCT evaluation of single ceramic crowns: comparison between conventional and chair-side CAD/CAM technologies
      Digital impressions were introduced to overcome some of the obstacles due to traditional impression materials and techniques. The aim of this in vitro study is to compare the accuracy of all ceramic crowns obtained with digital impression and CAD-CAM technology with the accuracy of those obtained with conventional impression techniques. Two groups of 10 crowns each have been considered. The digital data obtained from Group 1 have been processed and ...
      Read Full Article
    7. Handheld scanning probes for optical coherence tomography: developments, applications, and perspectives

      Handheld scanning probes for optical coherence tomography: developments, applications, and perspectives
      We present the handheld scanning probes that we have recently developed in our current project for biomedical imaging in general and for Optical Coherence Tomography (OCT) in particular. OCT is an established, but dynamic imagistic technique based on laser interferometry, which offers micrometer resolutions and millimeters penetration depths. With regard to existing devices, the newly developed handheld probes are simple, light and relatively low cost. Their design is described in ...
      Read Full Article
    8. Noninvasive Quantitative Evaluation of the Dentin Layer during Dental Procedures Using Optical Coherence Tomography

      Noninvasive Quantitative Evaluation of the Dentin Layer during Dental Procedures Using Optical Coherence Tomography
      A routine cavity preparation of a tooth may lead to opening the pulp chamber. The present study evaluates quantitatively, in real time, for the first time to the best of our knowledge, the drilled cavities during dental procedures. An established noninvasive imaging technique, Optical Coherence Tomography (OCT), is used. The main scope is to prevent accidental openings of the dental pulp chamber. Six teeth with dental cavities have been used ...
      Read Full Article
    9. Material Defects in Ceramic Crowns Identification by Optical Coherence Tomography and MicroCT

      Material Defects in Ceramic Crowns Identification by Optical Coherence Tomography and MicroCT
      Full ceramic crowns are considered revolutionary in developing the concept of aesthetic dentistry. Appreciate their aesthetic appearance particularly raise the cost prices, they do not ensure the risk of fractures and cracks which sometimes face the clinician after their insertion directly into the mouth. As a result of the fracture may occur between disputes team dentist-dental technician. The purpose of this study was to identify flaws of material included in ...
      Read Full Article
    10. Zirconia enriched dental adhesive: A solution for OCT contrast enhancement. Demonstrative study by synchrotron radiation microtomography

      Zirconia enriched dental adhesive: A solution for OCT contrast enhancement. Demonstrative study by synchrotron radiation microtomography
      Objective The major aim of this study was to prove the capability of the optical coherence tomography (OCT) method in visualizing the integrity of the adhesive fillings and of the interfaces between the adhesive, tooth structures and composite resin. As zirconium dioxide was added to the composition of the adhesive layer in order to strengthen the backscattered light in the OCT investigation, for a better visualization of the interfaces, the ...
      Read Full Article
    11. Imaging of noncarious cervical lesions by means of a fast swept source optical coherence tomography system

      Imaging of noncarious cervical lesions by means of a fast swept source optical coherence tomography system
      ... fast swept source optical coherence tomography system Eniko T. Stoica ; Corina Marcauteanu ; Adrian Bradu ; Cosmin Sinescu ; Florin Ionel Topala ; Meda Lavinia Negrutiu ; Virgil Florin Duma ; Adrian Gh. Podoleanu; Imag...
      Read Full Article
    12. Evaluation of metal-polymeric fixed partial prosthesis using optical coherence tomography

      Evaluation of metal-polymeric fixed partial prosthesis using optical coherence tomography
      Metal-Polymeric fixed partial prosthesis is the usual prosthetic treatment for many dental patients. However, during the mastication the polymeric component of the prosthesis is fractured and will be lost. This fracture is caused by the material defects or by the fracture lines trapped inside the esthetic components of the prosthesis. This will finally lead to the failure of the prosthetic treatment. Nowadays, there is no method of identification and forecast ...
      Read Full Article
    13. Optical Imaging of Oral Squamous Cell Carcinoma Using Optical Coherence Tomography and Micro CT

      Optical Imaging of Oral Squamous Cell Carcinoma Using Optical Coherence Tomography and Micro CT
      Oral squamous cell carcinoma (OSCC) constitutes 90% of oral cancer. Early detection is a cornerstone to improve survival and to reduce diagnostic delay. We propose optical coherence tomography (OCT), as a non-invasive diagnosis method. OCT represents a new high-resolution optical technique that permits 3D, real-time imaging of near surface abnormalities in complex tissues. In the present study half of the excisional biopsy was directed to the pathologist and the other ...
      Read Full Article
    14. Quantitative evaluation of dental abfraction and attrition using a swept-source optical coherence tomography system

      Quantitative evaluation of dental abfraction and attrition using a swept-source optical coherence tomography system
      A fast swept-source optical coherence tomography (SS-OCT) system is employed to acquire volumes of dental tissue, in order to monitor the temporal evolution of dental wear. An imaging method is developed to evaluate the volume of tissue lost in ex vivo artificially induced abfractions and attritions. The minimal volume (measured in air) that our system could measure is 2352 m 3 . A volume of 25,000 A-scans is collected in ...
      Read Full Article
    15. 1-24 of 56 1 2 3 »
  1. Categories

    1. Applications:

      Art, Cardiology, Dentistry, Dermatology, Developmental Biology, Gastroenterology, Gynecology, Microscopy, NDE/NDT, Neurology, Oncology, Ophthalmology, Other Non-Medical, Otolaryngology, Pulmonology, Urology
    2. Business News:

      Acquisition, Clinical Trials, Funding, Other Business News, Partnership, Patents
    3. Technology:

      Broadband Sources, Probes, Tunable Sources
    4. Miscellaneous:

      Jobs & Studentships, Student Theses, Textbooks
  2. Organizations in the News

    1. (47 articles) Victor Babes University of Medicine and Pharmacy
    2. (7 articles) State University of New York at Buffalo
  3. People in the News

    1. (55 articles) Adrian G. Podoleanu
    2. (40 articles) Adrian Bradu
    3. (28 articles) Meda-Lavinia Negrutiu
    4. (24 articles) Virgil-Florin Duma
    5. (13 articles) George M. Dobre
    6. (6 articles) Adrian Manescu
    7. (3 articles) Dorin Demian
    8. (3 articles) Ramona Cernat
    9. (3 articles) Gheorghe Hutiu
    10. (1 articles) Daniel S. Fried