1. Articles from C. Sinescu

    1-6 of 6
    1. OCT and shear-force evaluations of zirconia Fixed Partial Prosthesis processed with a conventional CAD/CAM technology

      OCT and shear-force evaluations of zirconia Fixed Partial Prosthesis processed with a conventional CAD/CAM technology

      Introduction. Dental ceramics show better biocompatibility and aesthetic properties in dental constructs with regard to metals. However, they also have an insufficient mechanical stability, as well as low resistance limits due to their fragility. Taking into account these aspects, glass infiltrated with ceramic materials such as alumina (i.e., zirconiareinforced ceramics) is being nowadays considered a better material for full fixed partial prostheses (FPPs) than ceramics: the former has a higher mechanical resistance, which makes it more appropriate for restoration areas, where there is an increased mechanical stress. The interest for zirconia is growing due both to its resistance and ...

      Read Full Article
    2. OCT evaluation of single ceramic crowns: comparison between conventional and chair-side CAD/CAM technologies

      OCT evaluation of single ceramic crowns: comparison between conventional and chair-side CAD/CAM technologies

      Digital impressions were introduced to overcome some of the obstacles due to traditional impression materials and techniques. The aim of this in vitro study is to compare the accuracy of all ceramic crowns obtained with digital impression and CAD-CAM technology with the accuracy of those obtained with conventional impression techniques. Two groups of 10 crowns each have been considered. The digital data obtained from Group 1 have been processed and the all-ceramic crowns were milled with a CAD/CAM technology (CEREC MCX, Sirona). The all ceramic crowns in Group 2 were obtained with the classical technique of pressing (emax, Ivoclar ...

      Read Full Article
    3. Handheld scanning probes for optical coherence tomography: developments, applications, and perspectives

      Handheld scanning probes for optical coherence tomography: developments, applications, and perspectives

      We present the handheld scanning probes that we have recently developed in our current project for biomedical imaging in general and for Optical Coherence Tomography (OCT) in particular. OCT is an established, but dynamic imagistic technique based on laser interferometry, which offers micrometer resolutions and millimeters penetration depths. With regard to existing devices, the newly developed handheld probes are simple, light and relatively low cost. Their design is described in detail to allow for the reproduction in any lab, including for educational purposes. Two probes are constructed almost entirely from off-the-shelf components, while a third, final variant is constructed with ...

      Read Full Article
    4. Feature Of The Week 10/5/14: Design and Testing of Handheld Scanning Probe Prototypes for Optical Coherence Tomography

      Feature Of The Week 10/5/14: Design and Testing of Handheld Scanning Probe Prototypes for Optical Coherence Tomography

      Three simple and low-cost configurations of handheld scanning probes for optical coherence tomography have been developed. Their design and testing for dentistry applications are presented. The first two configurations were built exclusively from available off-the-shelf optomechanical components, which, to the best of our knowledge, are the first designs of this type. The third configuration includes these components in an optimized and ergonomic probe. All the designs are presented in detail to allow for their duplication in any laboratory with a minimum effort, for applications that range from educational to high-end clinical investigations. Requirements that have to be fulfilled to achieve ...

      Read Full Article
    5. Evaluation of metal-polymeric fixed partial prosthesis using optical coherence tomography

      Evaluation of metal-polymeric fixed partial prosthesis using optical coherence tomography

      Metal-Polymeric fixed partial prosthesis is the usual prosthetic treatment for many dental patients. However, during the mastication the polymeric component of the prosthesis is fractured and will be lost. This fracture is caused by the material defects or by the fracture lines trapped inside the esthetic components of the prosthesis. This will finally lead to the failure of the prosthetic treatment. Nowadays, there is no method of identification and forecast for the materials defects of the polymeric materials. The aim of this paper is to demonstrate the capability of Optical Coherence Tomography (OCT) as a non-invasive clinical method that can ...

      Read Full Article
    6. The assessment of orthodontic bonding defects: optical coherence tomography followed by three-dimensional reconstruction

      The assessment of orthodontic bonding defects: optical coherence tomography followed by three-dimensional reconstruction
      Orthodontic bonding is a simple yet important procedure that can influence the outcome of treatment in case it is performed incorrectly. An orthodontic treatment shadowed by repeated bonding failures can become unduly long and will decrease patient trust and compliance. Optical coherence tomography has been widely used in ophtalmology but is relatively new to dentistry. Using OCT one can detect aerial inclusions within the orthodontic adhesive or even identify incongruence between the bracket base and the tooth surface. The aim of our study was to identify bonding defects and reconstruct them three-dimensionally in order to be able to characterize them ...
      Read Full Article
    1-6 of 6
  1. Categories

    1. Applications:

      Art, Cardiology, Dentistry, Dermatology, Developmental Biology, Gastroenterology, Gynecology, Microscopy, NDE/NDT, Neurology, Oncology, Ophthalmology, Other Non-Medical, Otolaryngology, Pulmonology, Urology
    2. Business News:

      Acquisition, Clinical Trials, Funding, Other Business News, Partnership, Patents
    3. Technology:

      Broadband Sources, Probes, Tunable Sources
    4. Miscellaneous:

      Jobs & Studentships, Student Theses, Textbooks
  2. Topics in the News

    1. (6 articles) University of Kent
    2. (5 articles) Victor Babes University of Medicine and Pharmacy
  3. Popular Articles

  4. Picture Gallery

    The assessment of orthodontic bonding defects: optical coherence tomography followed by three-dimensional reconstruction Evaluation of metal-polymeric fixed partial prosthesis using optical coherence tomography Feature Of The Week 10/5/14: Design and Testing of Handheld Scanning Probe Prototypes for Optical Coherence Tomography Handheld scanning probes for optical coherence tomography: developments, applications, and perspectives OCT evaluation of single ceramic crowns: comparison between conventional and chair-side CAD/CAM technologies OCT and shear-force evaluations of zirconia Fixed Partial Prosthesis processed with a conventional CAD/CAM technology Postdoctoral Fellows/Research Scientists at University of Washington, Seattle Perimeter Medical Imaging AI Announces Publication of Peer-Reviewed Journal Article Validating Potential Use of Wide-Field Optical Coherence Tomography (WF-OCT) in Head and Neck Surgeries Association of retinal thickness and microvasculature with cognitive performance and brain volumes in elderly adults A Deep Learning Framework for the Detection and Quantification of Reticular Pseudodrusen and Drusen on Optical Coherence Tomography Quantitative assessment of textural features in the early detection of diabetic retinopathy with optical coherence tomography angiography Line-field confocal optical coherence tomography of fibroepithelioma of Pinkus