1. Articles from Yasushi Shimada

    1-24 of 49 1 2 »
    1. Diagnosis of Occlusal Tooth Wear Using 3D Imaging of Optical Coherence Tomography Ex Vivo

      Diagnosis of Occlusal Tooth Wear Using 3D Imaging of Optical Coherence Tomography Ex Vivo

      The aim of this study was to assess the utility of 3D imaging of optical coherence tomography (OCT) for the diagnosis of occlusal tooth wear ex vivo. Sixty-three extracted human molars with or without visible tooth wear were collected to take digital intraoral radiography and 3D OCT images. The degree of tooth wear was evaluated by 12 examiners and scored using 4-rank scale: 1—slight enamel wear; 2—distinct enamel wear; 3—tooth wear with slight dentin exposure; 4—tooth wear with distinct involvement of dentin. The degree of tooth wear was validated by the histological view of confocal laser ...

      Read Full Article
    2. Evaluation of dental caries, tooth crack, and age-related changes in tooth structure using optical coherence tomography

      Evaluation of dental caries, tooth crack, and age-related changes in tooth structure using optical coherence tomography

      Optical coherence tomography (OCT) is an imaging technique that can visualize the internal biological structure without X-ray exposure. Swept-source OCT (SS-OCT) is one of the latest version of OCT, wherein the light source is a tunable laser that sweeps near-infrared wavelength light to achieve real-time imaging. The imaging depth of OCT is highly influenced by the translucency of the medium. The medium that does not transmit light and the deeper structure beyond the range of light penetration depth are not relevant for OCT imaging. In OCT, sound enamel is almost transparent at the OCT wavelength range, and enamel and dentin ...

      Read Full Article
    3. 3D imaging of proximal caries in posterior teeth using optical coherence tomography

      3D imaging of proximal caries in posterior teeth using optical coherence tomography

      Optical coherence tomography (OCT) can create cross-sectional images of tooth without X-ray exposure. This study aimed to investigate the diagnostic accuracy of 3D imaging of OCT for proximal caries in posterior teeth. Thirty-six human molar teeth with 51 proximal surfaces visibly 6 intact, 16 slightly demineralized, and 29 distinct carious changes were mounted to take digital radiographs and 3D OCT images. The sensitivity, specificity and area under the receiver operating characteristic curve (AUC) for the diagnosis of enamel caries and dentin caries were calculated to quantify the diagnostic ability of 3D OCT in comparison with digital radiography. Diagnostic accuracy was ...

      Read Full Article
    4. Effect of Pretreatment and Activation Mode on the Interfacial Adaptation of Nanoceramic Resin Inlay and Self-adhesive Resin Cementv

      Effect of Pretreatment and Activation Mode on the Interfacial Adaptation of Nanoceramic Resin Inlay and Self-adhesive Resin Cementv

      Objectives The first objective of this study was to determine if the luting material used for resin nanoceramic inlay affects interfacial adaptation. The second was to investigate whether pretreatment and the adhesive curing method before cementation affects interfacial adaptation. The final objective was to compare activation modes of luting material. Methods Class I cavities were prepared on extracted human third molars. Resin nanoceramic inlays were fabricated using Lava Ultimate CAD/CAM block (3 M). For the control groups, inlays were cemented using Panavia V5 (Kuraray Noritake). For the experimental groups, teeth were randomly divided into five experimental groups with four ...

      Read Full Article
    5. Diagnosis of Occlusal Caries with Dynamic Slicing of 3D Optical Coherence Tomography Images

      Diagnosis of Occlusal Caries with Dynamic Slicing of 3D Optical Coherence Tomography Images

      Detecting the extent of occlusal caries is a clinically important but challenging task required for treatment decision making. The aim of this study was to assess the diagnostic power of 3D swept-source optical coherence tomography (OCT) for evaluation of occlusal caries in comparison with X-ray radiography. Extracted human molars not exhibiting American Dental Association (ADA) criteria advanced caries were mounted in a silicone block and digital dental radiographs were captured from the buccal side. Subsequently, occlusal surfaces were scanned with a prototype Yoshida Dental OCT. Thirteen examiners evaluated the presence and extent of caries on radiographs and dynamically sliced 3D ...

      Read Full Article
    6. Does lining class-II cavities with flowable composite improve the interfacial adaptation?

      Does lining class-II cavities with flowable composite improve the interfacial adaptation?

      The objective of this study was to assess in-vitro interfacial cavity adaptation of different adhesive/composites systems in class-II restoration using SS-OCT and to confirm the findings with a confocal laser scanning microscope (CLSM). Standardized rectangular-shaped class-II cavities were prepared on 24 extracted human molar teeth, bonded with adhesive and lined with flowable composite. Cavities were further restored by bulk filling using packable composite. Specimens were divided into four groups ( n  = 7) according to restorative materials used; PrimeFil with Estelite Posterior composites (PF; Tokuyama Dental), Clearfil Tri-S Bond Plus with Majesty LV flowable and Majesty Posterior composites (TS; Kuraray Noritake ...

      Read Full Article
    7. Three-dimensional assessment of proximal contact enamel using optical coherence tomography

      Three-dimensional assessment of proximal contact enamel using optical coherence tomography

      Objective The purpose of this study was to detect and investigate the association of enamel microcracks with demineralization at proximal contact areas of premolars, using 3D swept-source optical coherence tomography (SS-OCT). Methods Extracted maxillary and mandibular premolars (n = 50 each), without any visible tooth cracks, were examined for demineralization of interproximal contact areas, using the International Caries Detection and Assessment System (ICDAS). SS-OCT was used to evaluate demineralization and detect microcracks. Demineralization progression was divided into 4 types by depth: 0 for sound enamel and Type I, II, and III for enamel demineralization penetrating into the outer third, the middle ...

      Read Full Article
    8. Assessment of root caries under wet and dry conditions using swept-source optical coherence tomography (SS-OCT)

      Assessment of root caries under wet and dry conditions using swept-source optical coherence tomography (SS-OCT)

      The purpose of this study was to compare optical properties of root caries under two observing conditions using swept-source optical coherence tomography (SS-OCT). In vitro and natural root caries were observed by SS-OCT under wet and dry conditions, followed by confocal laser scanning microscope (CLSM) and transverse microradiography (TMR). Signal intensity (SI), distance between SI peaks (SI-distance) and optical lesion depth were obtained from OCT. Lesion depth was measured from CLSM; lesion depth (LD TMR ) and mineral loss (ML) were obtained from TMR. In vitro root caries under wet and dry conditions showed different OCT images and SI patterns. Lesion ...

      Read Full Article
    9. Assessment of enamel cracks at adhesive cavosurface margin using three-dimensional swept-source optical coherence tomography

      Assessment of enamel cracks at adhesive cavosurface margin using three-dimensional swept-source optical coherence tomography

      Objectives Swept-source optical coherence tomography (SS-OCT) can construct cross-sectional images of internal biological structures. The aim of this study was to evaluate enamel cracks at the cavosurface margin of composite restorations using SS-OCT. Methods Bowl-shaped cavities were prepared at two locations (mid-coronal and cervical regions) on the enamel surface of 60 bovine teeth. Half of the cavities (30) were treated with phosphoric acid gel. A two-step self-etch adhesive (Clearfil SE Bond) was applied to all cavities and a flowable composite was placed in bulk. After 7 days in water at 37 °C, three-dimensional (3D) images of the specimens were obtained ...

      Read Full Article
    10. Optical analysis of enamel and dentin caries in relation to mineral density using swept-source optical coherence tomography

      Optical analysis of enamel and dentin caries in relation to mineral density using swept-source optical coherence tomography

      The aim of this study was to evaluate the signal intensity and signal attenuation of swept source optical coherence tomography (SS-OCT) for dental caries in relation to the variation of mineral density. SS-OCT observation was performed on the enamel and dentin artificial demineralization and on natural caries. The artificial caries model on enamel and dentin surfaces was created using Streptococcus mutans biofilms incubated in an oral biofilm reactor. The lesions were centrally cross sectioned and SS-OCT scans were obtained in two directions to construct a three-dimensional data set, from the lesion surface (sagittal scan) and parallel to the lesion surface ...

      Read Full Article
    11. Assessment of bacterial demineralization around composite restorations using swept-source optical coherence tomography (SS-OCT)

      Assessment of bacterial demineralization around composite restorations using swept-source optical coherence tomography (SS-OCT)

      Objective To observe the bacterial demineralization of the enamel and dentin around composite restorations bonded with one-step and two-step self-etch adhesive systems using swept-source optical coherence tomography (SS-OCT). Methods Forty class V cavities (2.5-mm surface diameter, 2.0-mm maximum depth) were prepared on cervical areas of 20 human molars. The specimens were either treated with one-step adhesive (Clearfil Tri-S Bond ND Quick; TS) or two-step adhesive (Clearfil SE Bond; SE), restored with a flowable resin composite (Estelite Flow Quick). Specimens in the demineralized group were incubated for 2 weeks after Streptococcus mutans biofilm formation, while specimens in the control ...

      Read Full Article
    12. Monitoring of cariogenic demineralization at the enamel–composite interface using swept-source optical coherence tomography

      Monitoring of cariogenic demineralization at the enamel–composite interface using swept-source optical coherence tomography

      Objectives The aim of this study was to evaluate enamel demineralization at composite restoration margins caused by cariogenic biofilm using swept-source optical coherence tomography (SS-OCT). Methods Sixty round-shaped cavities were prepared on the mid-buccal enamel surface of extracted human molars. The cavities were restored with Estelite Flow Quick flowable composite using either Clearfil SE Bond or Clearfil Tri-S Bond ND bonding agents. Streptococcus mutans suspension was applied to form a cariogenic biofilm on the surface. After 1, 2, or 3 weeks of incubation ( n = 10), the biofilm was removed to observe the carious demineralization at the cavosurface margins using SS-OCT ...

      Read Full Article
    13. Assessment of occlusal fissure depth and sealant penetration using optical coherence tomography

      Assessment of occlusal fissure depth and sealant penetration using optical coherence tomography

      Swept source optical coherence tomography (SS-OCT) is an interferometric imaging technique. This study aimed to assess SS-OCT as a diagnostic tool for the evaluation of occlusal fissure depth and sealant penetration into fissure. Seventy investigation sites of occlusal fissures without visible evidence of caries were categorized into four groups (smooth, shallow, intermediate, and deep fissures). Categorization utilized two methods: 1) visually, using a computer screen, and 2) using SS-OCT images. After sealant placement, penetration was observed in SS-OCT. The results obtained from SS-OCT and visual inspections were compared with those of confocal laser scanning microscope (CLSM). The diagnostic power of ...

      Read Full Article
    14. Fractography of interface after microtensile bond strength test using swept-source optical coherence tomography

      Fractography of interface after microtensile bond strength test using swept-source optical coherence tomography

      Objective To determine the effect of crosshead speed and placement technique on interfacial crack formation in microtensile bond strength (MTBS) test using swept-source optical coherence tomography (SS-OCT). Materials and methods MTBS test beams (0.9 × 0.9 mm 2 ) were prepared from flat human dentin disks bonded with self-etch adhesive (Clearfil SE Bond, Kuraray) and universal composite (Clearfil AP-X, Kuraray) with or without flowable composite lining (Estelite Flow Quick, Tokuyama). Each beam was scanned under SS-OCT (Santec, Japan) at 1319 nm center wavelength before MTBS test was performed at crosshead speed of either 1 or 10 mm/min ( n = 10 ...

      Read Full Article
    15. Assessment of cervical demineralization induced by Streptococcus mutans using swept-source optical coherence tomography

      Assessment of cervical demineralization induced by Streptococcus mutans using swept-source optical coherence tomography

      Exposed root surfaces due to gingival recession are subject to biofilm stagnation that can result in caries formation. Cervical enamel and dentin demineralization induced by a cariogenic biofilm was evaluated using swept-source optical coherence tomography (SS-OCT). The cementoenamel junction (CEJ) sections of extracted human teeth were subjected to demineralization for 1, 2, or 3 weeks. A suspension of Streptococcus mutans was applied to form a cariogenic biofilm using an oral biofilm reactor. After incubation, demineralization was observed by SS-OCT. For the analysis of SS-OCT signal, the value of the area under the curve (AUC) of the signal profile was measured ...

      Read Full Article
    16. Assessment of Self-Adhesive Resin Composites: Nondestructive Imaging of Resin–Dentin Interfacial Adaptation and Shear Bond Strength

      Assessment of Self-Adhesive Resin Composites: Nondestructive Imaging of Resin–Dentin Interfacial Adaptation and Shear Bond Strength

      Shear bond strength (SBS) and the interfacial adaptation (IA) of self-adhesive resin (SAR) composites to dentin were evaluated. Two SARs [Vertise Flow (VTF) and Fusio Liquid Dentin (FLD)] were evaluated and compared with a conventional restorative system [adhesive: OptiBond FL and composite: Herculite Précis (OBF/HP)]. Human third molars were used for SBS testing and IA imaging (n=7) using optical coherence tomography (OCT). Flattened dentin disks were prepared and the composites were applied into molds (2.4 mm diameter) that were positioned on dentin. Samples were subjected to SBS testing and OCT analysis, which considered an increase in ...

      Read Full Article
    17. Assessment of current adhesives in class I cavity: Nondestructive imaging using optical coherence tomography and microtensile bond strength

      Assessment of current adhesives in class I cavity: Nondestructive imaging using optical coherence tomography and microtensile bond strength

      Objectives To evaluate the sealing ability and the microtensile bond strength (MTBS) of different adhesive systems bonded to dentin in class I cavities. Methods Round tapered dentin cavities (3-mm diameter, 1.5-mm height) prepared in extracted human molars were restored using composite resin (Clearfil Majesty Posterior) with two-step etch-and-rinse adhesive system (Adper Single Bond 2: ASB2), two-step self-etch adhesive (Clearfil SE Bond: CSEB), all-in-one adhesives (G-Bond Plus: GBP; Tri-S Bond Plus: TSBP), or no adhesive (Control), or bonded using low-shrinkage composite with its proper adhesive (Filtek Silorane, Silorane Adhesive System: FSS). After 24-h water storage or 10,000 cycles of ...

      Read Full Article
    18. Interfacial Adaptation of Composite Restorations Before and After Light Curing: Effects of Adhesive and Filling Technique

      Interfacial Adaptation of Composite Restorations Before and After Light Curing: Effects of Adhesive and Filling Technique

      Purpose: To investigate the effects of placement technique and adhesive material on adaptation of composites before and after light curing. Materials and Methods: Cylindrical cavities (3 mm diameter, 1.7 mm depth) in extracted human molars were restored in 6 groups (n = 5) using 2 adhesives - two-step self-etching Clearfil SE Bond 2 (SE2) and all-in-one Clearfil Tri-S Bond Plus (TSP) (Kuraray Noritake Dental) - and 2 composites - Estelite Sigma Quick (ESQ) and Estelite Flow Quick (FLQ) (Tokuyama Dental) - placed with three different techniques: ESQ bulk placed, FLQ lining followed by ESQ and FLQ bulk placed. Specimens were scanned twice using swept-source ...

      Read Full Article
    19. Observation of white spot lesions using swept source optical coherence tomography (SS-OCT): in vitro and in vivo study

      Observation of white spot lesions using swept source optical coherence tomography (SS-OCT): in vitro and in vivo study

      This study aimed to assess swept source optical coherence tomography (SS-OCT) for in vitro and in vivo detection of enamel white spot lesion (WSL). WSLs without surface breakdown on 33 extracted human posterior teeth were non-invasively scanned using SSOCT. The teeth were then cross-sectioned and imaged under confocal laser scanning microscope (CLSM) and light microscopy (LM). SS-OCT cross-sectional images were compared with CLSM and LM. WSL shapes in SS-OCT images closely corresponded to those of LM. There were significant correlations ( p <0.001) in WSLs depth between SS-OCT and LM (r=0.92), SS-OCT and CLSM (r=0.80) and ...

      Read Full Article
    20. Assessment of current adhesives in class I cavity: Nondestructive imaging using optical coherence tomography and microtensile bond strength

      Assessment of current adhesives in class I cavity: Nondestructive imaging using optical coherence tomography and microtensile bond strength

      Objectives To evaluate the sealing ability and the microtensile bond strength (MTBS) of different adhesive systems bonded to dentin in class I cavities. Methods Round tapered dentin cavities (3-mm diameter, 1.5-mm height) prepared in extracted human molars were restored using composite resin (Clearfil Majesty Posterior) with two-step etch-and-rinse adhesive system (Adper Single Bond 2: ASB2), two-step self-etch adhesive (Clearfil SE Bond: CSEB), all-in-one adhesives (G-Bond Plus: GBP; Tri-S Bond Plus: TSBP), or no adhesive (Control), or bonded using low-shrinkage composite with its proper adhesive (Filtek Silorane, Silorane Adhesive System: FSS). After 24-h water storage or 10,000 cycles of ...

      Read Full Article
    21. Validation of Optical Coherence Tomography against Micro-computed Tomography for Evaluation of Remaining Coronal Dentin Thickness

      Validation of Optical Coherence Tomography against Micro-computed Tomography for Evaluation of Remaining Coronal Dentin Thickness

      Introduction Optical coherence tomography (OCT) is a noninvasive modality to obtain in-depth images of biological structures. A dental OCT system has become available for chairside application. This in vitro study hypothesized that swept-source OCT can be used to measure the remaining dentin thickness (RDT) at the roof of the dental pulp chamber during excavation of deep caries. Methods Human molar teeth with deep occlusal caries were investigated. After obtaining 2-dimensional and 3-dimensional OCT scans using a swept-source OCT system at a 1330-nm center wavelength, RDT was evaluated by image analysis software. Microfocus x-ray computed tomographic (micro-CT) images were obtained from ...

      Read Full Article
    22. Validation of Optical Coherence Tomography against Micro–computed Tomography for Evaluation of Remaining Coronal Dentin Thickness

      Validation of Optical Coherence Tomography against Micro–computed Tomography for Evaluation of Remaining Coronal Dentin Thickness

      Introduction Optical coherence tomography (OCT) is a noninvasive modality to obtain in-depth images of biological structures. A dental OCT system has become available for chairside application. This in vitro study hypothesized that swept-source OCT can be used to measure the remaining dentin thickness (RDT) at the roof of the dental pulp chamber during excavation of deep caries. Methods Human molar teeth with deep occlusal caries were investigated. After obtaining 2-dimensional and 3-dimensional OCT scans using a swept-source OCT system at a 1330-nm center wavelength, RDT was evaluated by image analysis software. Microfocus x-ray computed tomographic (micro-CT) images were obtained from ...

      Read Full Article
    23. Application of Optical Coherence Tomography (OCT) for Diagnosis of Caries, Cracks, and Defects of Restorations

      Application of Optical Coherence Tomography (OCT) for Diagnosis of Caries, Cracks, and Defects of Restorations

      Optical coherence tomography (OCT) is a noninvasive technique providing cross-sectional images of a tooth structure. This review describes the use of OCT for detecting dental caries, tooth fractures, and interfacial gaps in intraoral restorations. OCT can be a reliable and an accurate method and a safer alternative to X-ray radiography.

      Read Full Article
    24. Assessment of natural enamel lesions with optical coherence tomography in comparison with microfocus x-ray computed tomography

      Assessment of natural enamel lesions with optical coherence tomography in comparison with microfocus x-ray computed tomography

      A technology to characterize early enamel lesions is needed in dentistry. Optical coherence tomography (OCT) is a noninvasive method that provides high-resolution cross-sectional images. The aim of this study is to compare OCT with microfocus x-ray computed tomography ( μ CT ) for assessment of natural enamel lesions in vitro . Ten human teeth with visible white spot-like changes on the enamel smooth surface and no cavitation (ICDAS code 2) were subjected to imaging by μCT (SMX-100CT, Shimadzu) and 1300-nm swept-source OCT (Dental SS-OCT, Panasonic Health Care). In μ CT , the lesions appeared as radiolucent dark areas, while in SS-OCT, they appeared as areas of ...

      Read Full Article
    1-24 of 49 1 2 »
  1. Categories

    1. Applications:

      Art, Cardiology, Dentistry, Dermatology, Developmental Biology, Gastroenterology, Gynecology, Microscopy, NDE/NDT, Neurology, Oncology, Ophthalmology, Other Non-Medical, Otolaryngology, Pulmonology, Urology
    2. Business News:

      Acquisition, Clinical Trials, Funding, Other Business News, Partnership, Patents
    3. Technology:

      Broadband Sources, Probes, Tunable Sources
    4. Miscellaneous:

      Jobs & Studentships, Student Theses, Textbooks
  2. Topics in the News

    1. (49 articles) Yasushi Shimada
    2. (48 articles) Junji Tagami
    3. (46 articles) Alireza Sadr
    4. (43 articles) Tokyo Medical & Dental University
    5. (41 articles) Yasunori Sumi
    6. (40 articles) National Center for Geriatrics and Gerontology in Japan
    7. (12 articles) University of Washington
    8. (8 articles) Syozi Nakashima
    9. (6 articles) Turki Bakhsh
    10. (5 articles) Santec
    11. (2 articles) University College London
    12. (1 articles) Medical University of Vienna
    13. (1 articles) Osaka University
    14. (1 articles) Capital Medical University
    15. (1 articles) University of Alabama
    16. (1 articles) Singapore Eye Research Institute
    17. (1 articles) Tokyo Medical & Dental University
    18. (1 articles) Tianjin University
    19. (1 articles) University of Bonn
    20. (1 articles) Yanmei Liang
  3. Popular Articles

  4. Picture Gallery

    Validation of swept-source optical coherence tomography (SS-OCT) for the diagnosis of occlusal caries Non-destructive 3D imaging of composite restorations using optical coherence tomography: marginal adaptation of self-etch adhesives Non-invasive quantification of resin–dentin interfacial gaps using optical coherence tomography: Validation against confocal microscopy Estimation of lesion progress in artificial root caries by swept source optical coherence tomography in comparison to transverse microradiography Non-destructive assessment of cavity wall adaptation of class V composite restoration using swept-source optical coherence tomography Longitudinal assessment of subsurface artificial root caries lesions by optical coherence tomography in comparison with transverse microradiography Relationship between refractive index and mineral content of enamel and dentin using SS-OCT and TMR Effects of structural orientation of enamel and dentine on light attenuation and local refractive index: An optical coherence tomography study Effect of hydration on assessment of early enamel lesion using swept-source optical coherence tomography 3D evaluation of composite resin restoration at practical training using swept-source optical coherence tomography (SS-OCT) Clinical Usefulness of a Novel Optical Coherence Tomography Procedure, “Low Molecular Weight Dextran Infusion Followed by Catheter PUSH (D-PUSH)” Optical Coherence Tomography to Guide Percutaneous Coronary Intervention of the Left Main Coronary Artery: the LEMON study